Fix the HP Preparing Automatic Repair Error
Sometimes, your laptop may give you the error message saying HP preparing automatic repair. It may make you unable to work with the system, leaving you confused. During such instances, you can try to force the computer to restart by pressing the ‘Power’ button thrice. But there are other methods as well if this doesn’t work. The automatic repair loop sometimes shows a blue screen and sometimes a black one. It continues if you don’t do anything to fix it. Keep reading to learn how to fix this problem and start working with your laptop.
Resolutions for HP Preparing Automatic Repair
The first technique is to perform a hard reboot on your laptop. If that doesn’t work, follow these resolutions.
Perform a hard reboot
This technique is a simple resolution for this error. Here are the steps to perform this process.
Use the power button to completely turn off your computer.
If using a laptop, take out its battery.
Take out all the external USBs and peripherals.
Let the system remain for a few minutes in this state.
Now hit the power button.
Turn on your computer again but do not link the external devices.
Enter into safe mode
Another effective fix for the HP preparing automatic repair stuck problem is booting into safe mode.
Power off your system.
Now put the bootable installation disc into your system.
Boot from this disc.
When the prompt to press any key to boot appears, hit any keyboard key.
In the Windows Setup interface, choose your language preferences and tap ‘Next.’
Now click ‘Repair your computer.’
Thereafter choose ‘Troubleshoot.’
Tap ‘Advanced Settings’ followed by ‘Startup Settings.’
Now click ‘Restart.’
You will see another screen.
Hit the F4 key on the keyboard to boot into safe mode.
Now you can resolve problems by running an antivirus scan on the system.
Rebuild BCD
You can rebuild BCD via the command prompt. It will repair the Windows and help you overcome this error.
Reboot the HP system.
During the restart, hit F8.
Tap ‘Repair Your Computer.’
After that, tap ‘Troubleshoot.’
Choose the ‘Command Prompt’ tab.
Use these commands:
bootrec /fixmbr
bootrec /fixboot
bootrec /scans
booties /rebuildbcd
When the window recovers, you will view a ‘Successfully scanned Windows Installations’ message.
Input ‘exit’ and hit Enter.
Now, reboot your HP computer.
Perform diagnostics at boot
Doing diagnostics at boot is a good option to troubleshoot HP preparing automatic repair errors. It fixes issues with the hard drive.
Start by turning off your HP PC.
Hold the ‘Power’ button till it shuts completely.
Switch on the PC.
Keep pressing the ESC key till you view the startup menu.
Now, enter the diagnostics by pressing F2.
Perform a fast system test and check for failure IDs.
Hopefully, this will resolve the problem.
Final Thoughts
The HP preparing automatic repair error is common in Windows 10 and 11. But you can get past it with these fixes. All of them have been proven to show good results. If you need more help with this error, connect with a hardware technical support expert.
Comments
Post a Comment